Click for larger image |
|
PLEASE SELECT YOUR OPTIONS MORE INFO
|
|
 |
Grip Nut |
The Grip Nuts are an excellent upgrade to prevent leads slipping from the back of lamp housings. They work very effectively and are now fitted to all new units.
To fit Grip Nuts follow instructions below.
Recommended Tools.
--------------------------
Serrated Pliars
Needle-nosed Pliars
10mm Socket Wrench
Some old cloth
Installing Grip Nut.
------------------------
1. Taking your unit remove the front ring that holds the lamp in place
2. Take the lamp out, you will now be able to see inside the lamp unit. There are three wires, you want to focus on the three-pronged black and silver socket.
3. Using your serrated pliars grip the socket.
4. Apply 10mm socket wrench to exterior nut, and remove. As you will discover maintaining grip and removing the outside nut can be quite a frustrating art. The nut is sometimes assembled with a locking agent and so may prove difficult to remove. You can use cloth between the wrench and nut to prevent scratching.
5. Remove socket from the can and discard the white plastic o-ring.
6. Replace the socket from whence it came, carefully checking that the socket pin which does not have a wire attatched is pointing towards the top of the can, (opposite direction to clinch nut where bracket attaches).
7. Grip once more the socket from within can with the serrated pliars.
8. Preferably using needle-nosed pliars and some cloth, to prevent scratching, tighten the grip-nut to ensure a good seal.
And there you have it a light pod with a very secure lead. If all this proves very frustrating return your lamps to us with £2-00 to cover the postage and we will do it for
you.
|
What our customers say
©2008 www.lumicycle.com bicycle lights