My Cart

0 item(s) - £0.00

Lumicycle - the best bike lights on the market.

Tel: 0370 757 2229

More Views

Explorer Plus Enduro Pack

Quick Overview

Explorer Plus builds on the award winning Explorer platform, but houses an all new LUMIDRV4 control circuit. This highly efficient ARM core based microprocessor now controls the triple XML2 LED's independently, with just a single LED being utilised for low and mid power levels; ideal for road use or general off road, with the two other XML2 LED's being switched in on the higher power levels. This system not only increases the already impressive run times available with Explorer with any battery type, it also enables this unit with its slightly larger body to output a maximum lumen power of 3650 Lumens. A new "daylight" optimised pulse flash mode is also included, increasing the control levels to 7 compared to 6 for the other lights in our range

For extreme endurance we can at customers request adjust the settings for each of the power levels. This is what we did for Toni Lund for his epic 1500km IDITAROD challenge across the snow fields of Alaska. If you wish to discus this please get in touch

Explorer Plus shares much of its pedigree with its stable mate, utilising 6061 grade aircraft grade aluminium CNC machined body, highly efficient optics and the use of the very latest CREE XML2 LED components, the use of these special LED types enables Explorer Plus to render greens exceptionally well; a bonus when riding through dense trees as it enables the rider to see the approaching branches much better. The LUMIDRV4 controller is also compatible with wireless switching either as a master or slave light to other lights in the Lumicycle range. The hardware accelerated microprocessor on board ensures that the LED's are always driven at maximum efficiency resulting in super high output and extremely long life as you would come to expect from Lumicycle products.

Offering the same beam penetration and width as Explorer but with increased Lumen output, Explorer Plus is ideal as a single light unit for even the most extreme of off road adventures; and with its increased run times you can enjoy the ride for longer between charges.

The Explorer Plus Enduro Pack comes with the Explorer Plus light unit, our small but powerful Enduro 3.4Ah battery pack, Standard Lithium Ion charger (see order options) and a carbon fibre effect storage case. It offers excellent value for money compared to purchasing each item separately.

Availability: In stock


* Required Fields

Additional Information

The Explorer Plus external features includes a slightly longer body compared to Explorer for increased thermal performance and waterproof sealing. The light features seven easily selectable power modes including two Flash modes and a special Smart Boost mode designed for 3-minute sprints, the Smart Boost delivers maximum performance at high speed. At customers request the Explorer Plus now also indicates the state of battery charge when you first connect the light. Use of the new LUMIDRV4 driver circuit and software also increase the efficiency of the Explorer Plus enabling greater run times. Working together this increases run times by up to 20% whilst still maintaining industry leading brightness. We have worked closely with CREE to identify a very special version of the XML2 LED used in the light - which has a high element of green/blue in its spectrum - whilst not obvious to your eye when riding (its just a crisp white light), but if you are riding through trees or foliage you will notice that the branches and leaves will become much more obvious. The Smart Indicator software has also been enhanced, providing light output mode and battery health indicators on the back of the lamp.

LUMIDRV4 also offers an emergency "get you home" mode, that automatically switches the light into the lowest output strobe mode when it detects the battery is running flat, this can extend your ride time by several hours, on that occasion when you are left a few miles from home with a flat battery.

One of the beauties of the lamp is simple, rugged up/down toggle switch that allows the user to easily (even with heavy gloves) go up or down through the power modes without the need to cycle through unnecessary settings.


  • Three CREE XML2 U3 LEDs.
  • Up to 3650 Lumen output power (Smart Boost mode).
  • ARM Core processor with RF capability.
  • 20° Off Road Mid Beam ideal for singletrack.
  • 6500K – 7000K Colour temperature, special CREE LED
  • Custom driver circuitry - 95% max efficiency
  • Seven Power Modes: Flash1 (extreme low power), Flash2 (daylight pulse strobe), Low, Mid, High, Boost, timed 3 min smart boost (max output).
  • Up and down positive non-cyclical switching.
  • Smart indicator featuring mode selection and dynamic fuel gauge.
  • Positive safe switching enabling selective up and down levels.
  • Improved thermal management software.
  • Automatic emergency "get home mode" to extend battery run time at extreme low charge.
  • Hold switch to turn off so no accidental blackout.
  • Adjustable quick release bracket.
  • Compatible with all existing Lumicycle batteries and chargers.
  • Ideal size and performance for all off-road use.
  • Conceived, designed and manufactured in the UK.
  • Synergy of quality components.

Our 14.8 v Li-Ion batteries come in two capacities our Enduro 3.4 Amp/h and our Extender 6.8 Amp/h. Our Lithium-Ion batteries packs are made using the very highest quality Panasonic/Sanyo cells. The battery pack is the heart of any bike light system and we have found using these cells results in battery packs that typically last between 5-7 years when used and stored correctly.

LUMEN OUTPUT 150 400 1100 2200 3200 3650
POWER (WATT) 0.5 1.5 3.3 14.7 24.6 29.1
Enduro 3.4Ah Exp RUNTIME (HR) 51.7 18.2 8.4 4.6 3.4 3 mins (resettable)
Enduro 3.4Ah Exp Plus RUNTIME (HR) 114.2 38.1 17.3 4.6 3.4 3 mins (resettable)
Extender 6.8Ah Exp RUNTIME (HR) 102 36.4 16.8 9.2 6.8 3 mins (resettable)
Extender 6.8Ah Exp Plus RUNTIME (HR) 228.4 76.1 34.6 9.2 6.8 3 mins (resettable)
Bottle 6.8Ah Exp RUNTIME (HR) 102 36.4 16.8 9.2 6.8 3 mins (resettable)
Bottle 6.8Ah Exp Plus RUNTIME (HR) 228.4 76.1 34.6 9.2 6.8 3 mins (resettable)

Note the run time estimates are calculated based on fully charged batteries with the light in single continuous mode, and the use of the automatic battery saving mode; depending on mix of actual power level selected, temperature, battery age and charge state of battery these times may reduce in real life and are intended for a guide only.

2018 Improvements:

You can read about the 2018 improvements to our systems by clicking here.

Instruction Manual:

You can access an electronic version of the instruction manual by clicking here and the RF network setup and operating guide by clicking here.


Lamp with Q/R bracket weighs 177g.

★ ★ ★ Multi Award Winning Lights ★ ★ ★

Read our impressive full range of reviews here.